Back

Heron/Kittiwake Well Digging and Pumping Kit with Genset

The Kittiwake pump

2" solids handling submersible pump with Kittiwake T32/25 1½" x 1" dry
self-priming peristaltic pump.
Supplied with: Venom TP50-MS generator set with all pipework and fittings




Uses

  • Dewatering
  • Desludging
  • Well Pumping
  • Sewage Transfer Solids Handling 50mm
  • Well draining

Specifications

Pump No. 1 - Heron SH
Screw centrifugal submersible pump in cast iron construction with modular iron clog free impeller, double mechanical seals in oil bath and screwed BSP female suction and discharge connections.

Motor
1.5 kW, 400v, 3 phase submersible motor with IP58 insulation, nominal operating speed 2730rpm.

Pump No. 2 - Kittiwake T32/25
Kittiwake T32/25 1½" x 1" dry self-priming peristaltic pump (max head: 45m max flow 25 litres/min.) powered by a close coupled 0.37 kW 400 volt 3 phase 50 cycle T.E.F.C. 4 pole motor with IP55 protection, fitted with 30 metres of power cable and 16 amp plug. Enclosed in a protective steel cage with integral lifting eye for use during well digging operations.

Generator
Atalanta Venom TP50-MS dedicated motor starting generating set comprising a 5kVA 4kW 400 volt 3 phase 50 cycle brushless alternator with a 16 amp weatherproof socket protected by circuit breaker and earth leakage trip, powered by a close coupled Lombardini lightweight single cylinder diesel engine series 15LD400 - large fuel tank for over 4 hours operation, air-cooled, 4 stroke, recoil start, auto compression release and hours counter. Mounted on anti-vibration mounts inside steel roll frame incorporating a 2 wheel trolley.

Std. Options

  • Hose kits for both pumps
  • Pump spares for 1,000 hours normal operation.
  • Mounting plate to prevent boring into mud.
  • Generator spares

Other options available on request.
Kittiwake T32/25 and the Heron SH performance graph

PDF Click here to download the PDF instruction and maintenance manual

 

Back to top | Click here to contact us