Well Digging & Cleaning Kit - for water wells up to 20m deep
Well Digging & Cleaning Kit
2" solids handling submersible pump with Kittiwake T32/25 1½" x 1" dry self-priming peristaltic pump. Supplied with: Petrol or diesel generator set with all pipework and fittings

Well Digging & Cleaning Kit Uses

  • Dewatering
  • Desludging
  • Well Pumping
  • Sewage Transfer Solids Handling 50mm
  • Well draining
  • Well cleaning whilst being dug.

Well Digging & Cleaning Kit  Specifications

Pump 1

-

Heron SH


Screw centrifugal submersible well pump in cast iron construction with modular iron clog free impeller, double mechanical seals in oil bath and screwed BSP female suction and discharge connections.

Motor

1.5 kW, 400v, 3 phase submersible motor with IP58 insulation, nominal operating speed 2730rpm.

Pump 2

- Kittiwake T32/25
1½" x 1" dry self-priming peristaltic pump (max head: 45m max flow 25 litres/min.) powered by a close coupled 0.37 kW 400 volt 3 phase 50 cycle T.E.F.C. 4 pole motor with IP55 protection, fitted with 30 metres of

Generator

Atalanta Venom TP50-MS dedicated motor starting generating set comprising a 5kVA 4kW 400 volt 3 phase 50 cycle brushless alternator with a 16 amp weatherproof socket protected by circuit breaker and earth leakage trip, powered by a petrol or diesel single

Well Digging & Cleaning Kit Pump Performance

The Well Digging & Cleaning Kit diagram and performance graph
Specifications:
Max Solids NULLm/m
Max Suction NULLm
Max Flow 650 lpm
Max Head 20m

Well Digging & Cleaning Kit Accessories

  • Pump spares for 1000 hours normal operation.
  • Hose kit GPSP2/025 comprising 25m length of delivery hose, male BSP hose coupling and 2 hoseclips.
  • Mounting plate to prevent boring into mud.
  • Other options available on request.
PDFClick here to download the PDF instruction and maintenance manual